CRDD (Carrier requested delivery date):
CRDD 承运人要求的交货日期

• Preferred date for delivering freight to the Amazon FC.

• 将货物运送到亚马逊运营中心的首选日期

• Please note that the time is given in 24 hour (Military) Time format (I.e 0100 would be 1 AM and 1300 is 1 PM) as most Amazon FC’s operate 24 hours.
• 请注意，时间以 24 小时（军用）时间格式给出（即0100表示凌晨1点，1300 表示下午 1 点)，因为大多数 Amazon FC 都是 24 小时营业。

ARN (Amazon reference number):
ARN（亚马逊参考编号）

• Mandatory for collect freight (not applicable for prepaid freight)

• 到付运费必填（不适用于预付运费）

• If provided, it must be a valid ARN known to Amazon TRANS systems。
• 如果提供，它必须是 Amazon TRANS 系统已知的有效 ARN

PRO (Progressive Rotating Order) Number:
PRO（渐进旋转顺序）编号

• **Mandatory value** Provide the appropriate PRO numbers for all shipments being physically delivered under the ISA.
• **强制值** 为根据ISA 实际交付的所有货件提供适当的PRO 编号。

• Each PRO entry is a single value field containing no spaces and no more than 30 characters.
• 每个 PRO 条目都是一个单值字段，不包含空格且不超过 30 个字符。

• **Fulfilled by Amazon (FBA) Only** FBA shipment ID’s can be used in this field to auto populate the purchase order and unit information (I.E. FBA Shipment ID will always start with “FBAXXXXXXXX”).
• **仅限亚马逊 (FBA) 发货** FBA 货件 ID 可用于此字段以自动填充采购订单和单位信息（即 FBA 货件 ID 将始终以“FBAXXXXXXXX”开头）。

All FBA shipment ID’s physically delivering under the ISA must be entered into the appointment at time of creation.

根据 ISA 实际交付的所有 FBA 货件 ID 必须在创建时输入预约。

BOL (Bill of Lading):
BOL提单
• Provide the BOL number given by the vendor in this field.

• 在此字段中提供供应商提供的 BOL 编号。

• Cannot contain any spaces (must be a single token)

• 不能包含任何空格（必须是单个标记）

• Cannot be longer than 30 characters

• 不能超过 30 个字符

Pallet Count:
托盘计数
• Only necessary for appointment requests with Load Type "Palletized" and must be greater than 1.
• 只有负载类型为“托盘化”的预约请求是必需的，并且必须大于 1。

Carton Count:托盘计数
• Value must be greater than 1

• 只有负载类型为“托盘化”的预约请求是必需的，并且必须大于1。

Unit Count:
单位数量
• Optional field, complete based on shipper provided BOL information or for FBA shipments the unit count can be provided via the auto populate feature.
• 可选字段，根据托运人提供的BOL 信息完成，对于FBA 货件，可以通过自动填充功能提供单位数量。

PO List:
订单清单
• **Mandatory field** Separate POs by a space or comma.
• **必填字段** 用空格或逗号分隔采购订单。
Each PO must be a valid PO known to Amazon Transportation system and match the destination FC on the appointment request.

每个采购订单必须是亚马逊运输系统已知的有效采购订单，并且与预约请求中的目的地运营中心相匹配.

All POs must be the same freight terms on a single shipment line.

所有 PO 必须是同一装运行上的相同运费条款。

• **Please Note** Freight Forwarders, Brokers, Carriers, and Sellers requesting appointments through non Amazon contracted carriers must ensure the PO list is accurate and reflects what will be physically delivered at time of appointment creation.
• **请注意** 通过非亚马逊签约承运人请求预约的货运代理、经纪人、承运人和卖家必须确保 PO 列表准确无误，并反映在创建预约时将实际交付的内容。

Failure to do so can result in appointments being deleted without notice and for freight to be rejected at the Fulfillment Centers.如果不这样做，可能会导致预约被删除，恕不另行通知，并导致运营中心拒收货运。

After filling all the details click on the submit button.
填写所有详细信息后，单击提交按钮。

Once the request for an appointment is submitted to Amazon, you will get a message that the appointment request has been registered (But not confirmed/scheduled in the system). 将预约请求提交给亚马逊后，您将收到一条消息，表明预约请求已注册（但未在系统中确认/安排）。

After being verified by our system, the request will then be scheduled and the actual appointment details will be communicated through the requestor’s email address.在我们的系统验证后，将安排请求，实际预约细节将通过请求者的电子邮件地址传达。

Important Note:
重要的提示
You will receive an acknowledgement of the request immediately from the portal. However, you will have to wait for confirmation on the appointment. 您将立即从门户收到请求确认。 但是，您必须等待预约确认。

The confirmation email that you receive once the appointment is confirmed is shown in Appendix -2. You can check the status of the appointment in the portal itself. 预约确认后您收到的确认电子邮件显示在附录-2 中。 您可以在门户网站本身中检查约会的状态。

The appointment status will change from “Pending confirmation” to “Confirmed” once the appointment is confirmed.一旦预约被确认，预约状态将从“待确认”变为“已确认”。